G-501

Product Description

Shin-Etsu's G-501 grease is a specialty silicone grease that is ideal for plastics and provides excellent lubrication and noise reduction. G-501 is much less likely to cause stress cracking of polycarbonate (PC), polyacetal (POM), ABS, and most other plastics.

Product Features

  • Specifically designed for lubricating plastics
  • Significantly less likely to cause stress cracking than other lubricants
  • Superior lubrication and noise reduction
  • Wide usable temperature range

Typical Applications

  • Blower bearings
  • Lubricating plastic parts

Typical Properties

Type
Grease
One/Two Component
One
Low Molecular Weight Siloxane Stripped?
Y
Color
White
Density @ 23C (g/cm3)
0.92
Penetration (1/10mm)
306
% Oil Separation
2.5
% Volatile Content
0.10
Low-Temp Torque: Starting (mN/m)
211
Low-Temp Torque: Running (mN/m)
103
Usable Temperature Range (C)
-50 to +150

Note: Values are not for specification purposes.

Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use. Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.

Contact Us
Shin-Etsu Silicones of America, Inc.
1150 Damar Drive
Akron, Ohio 44305-1201

You can leave a message using the contact form here.

Please Note - This is for general business and product inquiries only! Messages sent using this form will be received by our inside sales dapartment.

If you are inquiring about employment opportunities please use the corresponding link that is listed with the post in our Jobs Listings section of our site.