Product Description

Shin-Etsu's KE-1886 is a fast, single component, heat curing conformal coating that will cure to form durable and flexible elastomer for protecting electronic components. KE-1886 is suitable for application by selective spray coating, mass coating, and flow coating, making it ideal for coating circuit boards.

Product Features

  • Fast cure
  • Single component
  • Heat cure
  • Excellent unprimed adhesion to most substrates

Typical Applications

  • Coating circuit boards and other electronic components

Typical Properties

Conformal Coating
Cure Type
One/Two Component
Cold Storage
Low Molecular Weight Siloxane Stripped?
Creamy White
Density @ 23C (g/cm3)
Viscosity (Pa·s)
Cure Conditions
1hr @ 100C
Shore A Hardness
Tensile Strength (MPa)
% Elongation
Shear Strength (psi)
Volume Resistivity (TΩ·m)
Dielectric Strength (kV/mm)
Dielectric Constant
3.1 @ 50Hz
Dielectric Dissipation Factor
1.0 x 10-3 @ 50Hz
Usable Temperature Range (C)
-40 to +180

Note: Values are not for specification purposes.

Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use. Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.

Contact Us
Shin-Etsu Silicones of America, Inc.
1150 Damar Drive
Akron, Ohio 44305-1201

You can leave a message using the contact form here.

Please Note - This is for general business and product inquiries only! Messages sent using this form will be received by our inside sales dapartment.

If you are inquiring about employment opportunities please use the corresponding link that is listed with the post in our Jobs Listings section of our site.